NASA scientists have partially cleaned up the solar modules of the Insight lander operating on Mars, by using grain sands collected nearby and trickling them on the panels during the windiest time of the day. This handmade technique has made it possible, according to them, to increase the PV array’s yield of about 30 watt-hours of energy per ‘sol,’ or Martian day.
The lander’s robotic arm collecting sand near the solar array.
Image: National Aeronautics and Space Administration
Insight is a robotic lander designed by the U.S. National Aeronautics and Space Administration and sent to Mars in 2018 to study the deep interior of The Red Planet. Since it started operating, at around 344 million kilometers from the Earth, the lander has accumulated dust on many of its parts, including the PV array that is crucial for repowering its batteries and keeping the machine functioning.
Although the panels are designed to provide enough power over a full Mars year even with significant dust accumulation, NASA is currently planning to hibernate the lander during the Martian winter and to shut down science instruments to keep its electronics warm.
Simultaneously, the agency has also begun to clean the panels of the array with a sort of handmade technique that is, somehow, producing interesting results. On May 22, which corresponds to the mission's 884th Martian day, the lander's robotic arm trickled sand near one solar panel, helping the wind to carry off some of the panel’s dust. The sand grains would strike dust on the panels by hopping off the solar panel surface and skipping through the air in the wind, with the larger grains being able to carry off the smaller dust particles in the wind.
“With winds blowing northwest at a maximum of 20 feet (6 meters) per second, the trickling of sand coincided with an instantaneous bump in the spacecraft’s overall power,” the agency explained. This operation was carried at noon, Mars time, which is the planet's windiest time of day, and resulted in a gain of about 30 watt-hours of energy per ‘sol,' or Martian day. “The power boost should delay the instruments being switched off by a few weeks, gaining precious time to collect additional science data,” NASA said in a statement, noting that a second attempt to clean the panels was also done on Saturday, June 5.
Despite the success of the operation, the agency said it is uncertain how much additional yield the cleaning will provide, although it gave additional helpful margin to Insight’s power reserves. At the end of the Earth summer, which corresponds to that of the Martian winter, the solar panels should be able to harvest more sunlight and turn the lander's instruments back on.
A previous, unsuccessful attempt to remove dust from the modules was done almost a year earlier by pulsing the motor that opens and closes the solar array. The use of brushes or fans to clear off dust was excluded since the beginning, as these would have added weight and possible failure points.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
More articles from Emiliano Bellini
“Earth summer, which corresponds to that of the Martian winter,”
There’s no one “Earth summer” in a year – there are two, one each for the northern and southern hemispheres. True for Mars also.
On which (Martian) hemisphere is Insight?
Hi Brent, thanks for your comment. The scientists did not specify on which Martian hemisphere the Insight lander is located.
Please be mindful of our community standards.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.
Legal Notice Terms and Conditions Privacy Policy © pv magazine 2022
This website uses cookies to anonymously count visitor numbers. View our privacy policy. ×
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.